Problems with dual booting??
1)promting u to insert another disk which says x86 or x64 architecture?? Then, restart the system and run the disc from boot mode by press boot/ setup keys (F2,F12,Esc etc depends on the laptop u use, usually the above keys to be pressed are displayed on the screen for very short time) and select the boot from cd/dvd/usb and select the language,followed by selecting the drive(Be sure that selected drive is of primary partition as os cannot be installed in logical portion)
2)set up is not installing sucessfully, then change sata mode (ie ATA,AHCI) or enable the legacy mode
http://
http://
1)promting u to insert another disk which says x86 or x64 architecture?? Then, restart the system and run the disc from boot mode by press boot/ setup keys (F2,F12,Esc etc depends on the laptop u use, usually the above keys to be pressed are displayed on the screen for very short time) and select the boot from cd/dvd/usb and select the language,followed by selecting the drive(Be sure that selected drive is of primary partition as os cannot be installed in logical portion)
2)set up is not installing sucessfully, then change sata mode (ie ATA,AHCI) or enable the legacy mode
http://
http://
No comments:
Post a Comment